Purpose: To investigate the effects of different surface treatments and thermocycling on shear bond strength (SBS) be-tween resin cement and zirconia-reinforced lithium-silicate (ZLS) ceramic.
Materials and Methods: 96 ZLS ceramic specimens were randomly allocated to four different surface treatment groups: etch and silane (ES), etch and universal primer (EUP), self-etching primer (SEP), and sandblasting and silane (SS). Stan-dardized composite cylinders were bonded to surface-treated ZLS ceramic, after which SBS was obtained either after 24-h water storage only or with an additional 5000 thermal cycles (TC), resulting in eight subgroups (n = 12). After evaluation of failure mode under a stereomicroscope, representative SEM images were acquired. To examine areal average surface roughness (Sa), additional ZLS specimens were prepared and randomly allocated to 3 groups: hydrofluoric acid etching, self-etching primer, and sandblasting (n = 10). Supplementary specimens were examined using field-emission scanning electron microscopy (FE-SEM) (n = 2) and atomic force microscopy (AFM) (n = 2) to investigate their surface topographies.
Results: ANOVA showed a statistically significant difference in SBS following different surface treatment protocols after 24-h water storage (p < 0.001). However, TC groups revealed no statistically significant difference in their SBS (p = 0.394). All surface treated groups were significantly affected by TC (p < 0.001), except for the SS group (p = 0.48). Sa was signifi-cantly influenced by the different surface treatment protocols (p < 0.001).
Conclusion: The ability of self-etching primer to achieve comparable bond strength with a less technique-sensitive ap-proach makes it a favorable alternative to ES for the surface treatment of ZLS ceramics.