Objective: To test the null hypothesis that dentine treatment with silver diamine fluoride (SDF), a potent antimicrobial agent, following use of proteolytic and chelating agents does not influence the wettability of an epoxy resin (AH Plus, Dentsply Sirona, Charlotte, NC, USA) and a tricalcium silicate sealer (BioRoot RCS, Septodont, Saint-Maur-des-Fossés, France).
Methods: Seventy-two intraradicular dentine specimens were divided into six groups based on the final irrigation solutions used: 2.5% sodium hypochlorite (NaOCl) and 17% ethylenediaminetetraacetic acid (EDTA) (NaOCl-EDTA) (group 1); NaOCl-EDTA-NaOCl (group 2); NaOCl-EDTA followed by 3.8% SDF, NaOCl-EDTA-SDF (group 3); NaOCl-EDTA-NaOCl-SDF (group 4); SDF (group 5) and saline (group 6). After irrigation, the specimens were divided into subgroups according to the sealer used, AH Plus or BioRoot RCS. Contact angles were measured using a contact angle analyser. The data were analysed using an independent t test, one-way analysis of variance (ANOVA) and Tamhane T2 post hoc test, with the level of significance set at P < 0.05.
Results: In the epoxy resin sealer group, dentine surfaces treated with only SDF showed the lowest contact angle. This was significantly less than the groups in which NaOCl was used as the final irrigant (P < 0.05). In the tricalcium silicate–based sealer group, the groups treated with SDF showed significantly greater contact angles when compared to the control group (P < 0.05).
Conclusion: It was concluded that SDF conditioning of dentine favours the wettability of epoxy resin sealer but is detrimental to the wettability of tricalcium silicate sealer.
Schlagwörter: bioceramic sealer, contact angle, epoxy resin sealer, ethylenediaminetetraacetic acid, silver diamine fluoride, sodium hypochlorite