The International Journal of Oral & Maxillofacial Implants, 02/2024

Purpose: To analyze the available evidence and assess the effect of different implant coatings on healing outcomes. Materials and Methods: Using the PICOS strategy, a structured question was formed. A protocol was agreed upon and registered with PROSPERO (no. CRD42022321926). The MEDLINE, Embase, Cochrane Database of Systematic Reviews, Scopus, Web of Science, Pubmed, and ScienceDirect databases were searched using a structured strategy. Study selection was independently carried out in duplicate, first by title and abstract, then by full-text assessment. Quality and risk of bias were independently assessed in duplicate using AMSTAR 2 and ROBIS. Data extraction was independently undertaken in duplicate using a predefined extraction form. Results: The search yielded 11 systematic reviews for inclusion. The most commonly assessed coatings were based on calcium phosphate—including hydroxyapatite (HA), brushite, and bioabsorbable nano-HA—followed by bisphosphonate, then bioactive glass coatings. Included reviews most frequently assessed marginal bone loss (MBL), bone-to-implant contact (BIC), and survival/success rates. There was considerable heterogeneity and small sample sizes. The quality assessment suggested low confidence in the reviews and high risk of bias. Conclusions: The included reviews provide weak evidence that implant coatings improve osseointegration and reduce MBL following implant placement. There was weak evidence for progressive complications for calcium phosphate coatings. Further research and long-term multicenter controlled clinical trials with improved standardization and control of bias are required to better understand the effects of coating implants. Palabras clave: dental implant, surface coating, functionalization, osseointegration, overview of systematic review, umbrella review

Purpose: To retrospectively determine the cumulative survival rate (CSR) and marginal bone level change (ΔMBL) around novel hybrid design tissue-level (TL) dental implants that support multiple-screw-retained restorations. Materials and Methods: Implant CSRs were analyzed at the implant and patient level using Kaplan-Meier estimates. ΔMBL was measured by comparing the periapical loading and follow-up visit radiographs using an improved standardized digital methodology based on image gray levels. ΔMBL outcomes were subject to linear mixed regression to identify potential risk factors. Results: A total of 301 TL implants in 69 patients with an average age of 62.6 ± 11.7 years (range: 36 to 87 years) at the time of implant placement were considered for the analysis. All 301 implants were successfully restored and loaded. The 54-month CSRs at the implant and patient levels were 98.9% (95% CI: 96.7 to 99.6) and 95.3% (95% CI: 86.1 to 98.5), respectively. ΔMBL after a mean follow-up of 22 ± 10.7 months after loading was 0.00 ± 0.57 mm. None of the implant sites showed marginal bone loss exceeding 1.5 mm. Multivariate regression analysis revealed a significant association between ΔMBL and the loading protocol (P = .027) but not between ΔMBL and age or transgingival height. Conclusions: The high CSRs and stable peri-implant marginal bone levels support the use of recent TL implants, which have a hybrid design inherited from the bone-level implant-abutment connection, as a suitable treatment option for restoring partially or fully edentulous patients with a good mid-term prognosis. These results should be complemented by further prospective studies in a real-world multicenter private practice setup that represents the daily realities of implant treatment. Palabras clave: dental implants, retrospective study, cumulative survival rate, marginal bone level, real-world evidence, hybrid design

Purpose: To analyze the effectiveness of coating of abutments with antimicrobial agents and their influence on the physicochemical and biologic properties of the coated materials. Materials and Methods: This work was registered in Open Science Framework (osf.io/6tkcp) and followed the PRISMA protocols. A search of two independent reviewers of articles published up to October 29, 2021, was performed in the Embase, PubMed, Science Direct, and Scopus databases. Results: The databases found a total of 1,474 references. After excluding the duplicates, 1,050 remained. After reading the titles and abstracts and applying the inclusion criteria, 13 articles remained and were read in full. A total of 8 articles were included in this systematic review. Different antimicrobial agents have been used to coat abutments, including graphene oxide, polydopamine, titanium and zirconium nitride, lactoferrin, tetracycline, silver, and doxycycline with varied release times. Titanium-coated silver showed a better antimicrobial agent release time of up to 28 days. Chemical analysis confirmed the presence of antimicrobials on the surface after coating. Different pathogenic microorganisms, such as Streptococcus sanguinis, Streptococcus oralis, and Staphylococcus aureus, were inhibited when in contact with the coated surface. Conclusions: This review showed that there is still no consensus on which is the better antimicrobial agent and which coated materials have the better performance. However, the association of surface coating of abutments with antimicrobials is feasible and can benefit many patients, which can support their clinical use to favor the healing process and prevent infections that can lead to treatment failure with dental implants. Palabras clave: antimicrobial agent, dental implants, dental implant-abutment design, peri-implantitis

Purpose: To validate an innovative 3D volumetric method of evaluating tissue changes proposed by Lee et al in 2020 by comparing the results of this method—in which the scanned peri-implant surfaces were transformed, visualized, and analyzed as 3D objects—to the results reported by an existing method based on calculation of the mean distance between measured surfaces. The null hypothesis was that there was no statistically significant difference between the two methods. Additionally, the present study evaluated peri-implant tissue changes 5 years after single implant placement in the esthetic zone. Materials and Methods: Both methods were applied to 11 oral implant site casts (6 maxillary central incisor sites, 5 maxillary lateral incisor sites) taken from 11 patients at crown placement and at follow-up examinations 5 years later. The methods are based on digital workflows in which the reference and 5-year casts are scanned and the resulting STL files are superimposed and analyzed for three regions of interest (mesial papilla, central area, and distal papilla). The volumetric changes reported by the Lee et al method and the mean distance method were calculated and compared using the Spearman rank correlation coefficient (P < .01) and the Wilcoxon signed-rank test (P < .05). Results: The correlation between the two sets of measurements was very high (Spearman rank correlation coefficient = 0.885). The new volumetric method indicated a mean volume loss of 2.82 mm3 (SD: 5.06), while the method based on the measurement of mean distance showed a mean volume loss of 2.92 mm3 (SD: 4.43; Wilcoxon signed-rank test result: P = .77). No statistically significant difference was found. The two methods gave equivalent results, and the null hypothesis was accepted. Conclusions: The new volumetric method was validated and can be considered a trustworthy tool. Palabras clave: volumetric analysis, digital workflow, peri-implant tissue, esthetic zone

Purpose: To evaluate bone preservation and esthetic recovery between the socket-shield technique (SST) with different labial bone plate thicknesses and the conventional immediate implant technique (CIIT). Materials and Methods: Patients who underwent immediate implant placement in the anterior region were divided into three groups: the SST with a thickwall phenotype (> 1 mm; SSTA group), the SST with a thin-wall phenotype (< 1 mm; SSTB group), and the CIIT with a thickwall phenotype (> 1 mm; CIIT group). Radiologic images and clinical photos were collected before surgery, immediately postoperatively, and 6 months postoperatively. The labial bone width, labial bone width change (BWC), labial bone volume change (BVC), pink esthetic score (PES), and complication rate were evaluated among the three groups. Statistical analysis was performed using SPSS software. Results: A total of 60 patients (n = 20/group) were enrolled in this 6-month retrospective study. The BWC in the SSTA group (0.22 to 0.30 mm) and the SSTB group (0.18 to 0.33 mm) was less than that in the CIIT group (0.61 to 0.80 mm; P < .004). The SSTA group and the SSTB group had a lower BVC (24.08 vs 21.14 vs 54.81, respectively; P = .004) and greater PES (11.75 vs 11.65 vs 10.65, respectively; P = .009) than the CIIT group. No complications occurred among these patients. Conclusions: With the limitations of this study, it can be concluded that the SST is a reliable method for preserving bone and achieving satisfactory esthetic outcomes. The labial bone plate phenotype associated with the SST has minimal impact on both clinical and radiologic outcomes. Palabras clave: socket-shield technique, conventional immediate implant technique, bone alteration, buccal bone plate, anterior, esthetic

Purpose: To describe the use of digital technology to surgically guide the shell technique using allogenic cortical plates for a fully guided bone augmentation procedure. Materials and Methods: A total of 10 patients who required bone augmentation for implant placement were included in this study. Allogenic cortical plates were planned using CAD/CAM to have identical thickness to the original cortical plates, then were digitally positioned and shaped to outline the bone defect according to the existing anatomical details. A cutting pattern and a surgical template were manufactured according to the digitally preplanned bone graft and the intraoral setting. Results: A total of 12 horizontal bone grafting procedures were performed using the shell technique with allogenic cortical plates. All grafting procedures were deemed successful and allowed for ideal 3D implant positioning. Of the 12 bone grafting procedures, which used a surgical template to position the cortical plate, 3 required an adjustment to reposition the plate to a more ideal position. Conclusions: Digital technology was used to create a surgical template to guide the shell bone grafting technique with allogenic cortical plates. All surgical templates offered a fixed support to hold the cortical allogenic plate in the preplanned position, offering a predictable, simplified, and accurate guided bone grafting procedure. Further studies on a larger population of patients are necessary to assess those results and to verify the treatment approach described in this study. Palabras clave: bone grafting, computer-guided surgery, shell technique

Purpose: To investigate the relationship between the structural parameters of trabecular bone obtained from CBCT imaging and the primary stability of dental implants. Materials and Methods: Sixty patients underwent implant placement followed by primary stability evaluation via measurement of the insertion torque (IT) and the implant stability quotient (ISQ). Gray values (GV) and the fractal dimension (FD) were also measured using pretreatment CBCT images. Results: FD values showed a positive and significant relationship with ISQ and IT values (P = .017 and P = .004, respectively). Additionally, there was a positive and significant correlation between GV and IT (P = .004) as well as between GV and ISQ (P = .010). FD and GV showed a considerable difference between the maxillary and mandibular jaws and were higher in the mandible. Only FD was significantly different between men and women and was higher in men. In the two age groups (older and younger than 45 years), only GV was considerably higher in people older than 45 (P < .05). Conclusions: Both fractal dimension and gray values obtained from CBCT are efficient methods for predicting the primary stability of the implant due to their relationship with ISQ and IT values. Palabras clave: fractal dimension, gray value, cone beam computed tomography, CBCT, implant primary stability, insertion torque, implant stability quotient

Purpose: To evaluate and compare the difference in retention between implant-supported restorations with and without surface modification of the implant abutments. Materials and Methods: A total of 30 patients with singletooth implants were restored with cement-retained (Multilink N, Ivoclar) restorations using titanium base abutments (Variobase, Straumann) and randomly assigned surface modifications. Group 1 used nonmodified abutments, group 2 used sandblasted abutments, and group 3 used sandblasted abutments followed by an application of metal primer. All patients were recalled for a baseline examination 6 months after crown placement. The pull-out strength and intergroup distribution of mean pull-out strength were assessed. To assess differences between the three groups, intergroup statistical comparison of continuous variables was done using one-way ANOVA with Tukey correction for multiple group comparisons. Results: The results of the intergroup mean pull-out strength distribution revealed that the distribution of mean ± SD pull-out strength in group 1, group 2, and group 3 were 220.79 ± 94.23, 488.64 ± 84.12, and 705.46 ± 112.75 Ncm, respectively. Conclusions: Sandblasting followed by the application of metal primer produced the highest retention of porcelain-fused-to-metal (PFM) crowns to titanium base abutments, followed by sandblasting alone, with the least retention being observed with no surface treatment. Palabras clave: dental implants, metal primer, resin cement, sandblasting, surface modification, Ti-base abutment, titanium base, Variobase abutment

Purpose: To compare the treatment time of digital and conventional workflows for single-implant crowns, as well as prostheses made of polymer-infiltrated ceramic-network (PICN; Vita Enamic, Vita Zahnfabrik) and lithium disilicate (LS2; n!ce, Straumann). Materials and Methods: A total of 40 patients who needed a single-implant crown in posterior regions were considered and randomly divided into digital workflows (n = 20) that used an intraoral scanner (IOS; iTero Element 5D, Align Technologies) and conventional workflows (n = 20) that used polyether impressions (3M ESPE Impregum Penta). Then, each group was again distributed into two subgroups based on the crown material used: PICN (n = 10) and LS2 (n = 10). Treatment time was calculated for both digital and conventional workflows. Analysis was done at a 5% confidence interval (P < .05). An independent two-sample t test was used to compare treatment time between the groups. The Kruskal–Wallis test was used to compare clinical try-in time among subgroups. Any of the implant crowns that had to be remade in each subgroup were evaluated using the Fisher exact test. Results: The entire process of digital and conventional workflows required 104.31 ± 20.83 and 153.48 ± 16.35 minutes, respectively. Digital workflows saved 39.2% more time than the conventional protocol for the single-implant crown treatment (P < .0001). Conclusions: Both digital and conventional workflow protocols can achieve a successful outcome for single-implant monolithic crowns in posterior areas. The digital protocol yielded greater timesaving over the conventional procedure in data acquisition and laboratory steps, while the time for clinical try-in and delivery were similar. Palabras clave: clinical research, dental implants, crowns, digital workflow, time efficiency

Purpose: To evaluate peri-implant tissue health and bone resorption in patients with implant-supported fixed partial rehabilitations. In particular, possible correlations between plaque accumulation and bone loss, as well as other periimplant health parameters, were investigated. Materials and Methods: A total of 44 patients rehabilitated with fixed implant-supported partial rehabilitations were included. The following parameters were recorded: spontaneous bleeding (SB), suppuration, bleeding on probing (BOP), plaque index (PI), and probing depth (PD). Periapical radiographs were taken to measure crestal bone loss (BL). A nonparametric test (Spearman rank coefficient; rs) was used to identify possible correlations between the clinical parameters recorded. Results: A total of 121 implants were analyzed. Global PI and BOP were 49.58% and 20.25%, respectively. There were no cases of suppuration, and only 2 implants showed spontaneous bleeding. Mean BL was 1.53 mm (SD: 0.98). No implants showed peri-implantitis. There was a weak, statistically significant correlation between PI and BL (rs = 0.27, P [2-tailed] = .99) and between PI and the other peri-implant parameters (BOP: rs = 0.14, P = .14; PD: rs = 0.04, P = .65; SB: rs = –0.08, P = .34). A very weak correlation was also found between BL and BOP (rs = 0.1, P = .2) and between BL and PD (rs = 0.02, P = .7). Correlation was found between BL and age (rs = 0.13, P = .81) and between the other peri-implant parameters and age using dichotomization (> or < 65 years; PI: rs = –0.14, P = .11; PD: rs = –0.21, P = .01; BOP: rs = –0.21, P = .01; SB: rs = 0.05, P = .53). No statistically significant correlations were found between the clinical parameters evaluated and the sex or the dental arch treated (maxilla vs mandible). In contrast, the correlation between periodontal parameters and years elapsed since surgery (follow-up) was significant. Conclusions: The present research suggests that in implant-supported fixed partial rehabilitations, dental implants with greater plaque accumulation are more likely to present augmented probing depth, peri-implant inflammation, and bone loss, although the correlation is statistically very weak. Patient age and time of follow-up also significantly affected peri-implant health parameters. Palabras clave: dental implants, bone resorption, peri-implantitis, cross-sectional study

Purpose: To evaluate the soft tissue response to the placement of additively manufactured subperiosteal jaw implants (AMSJI) in the severely atrophic maxilla and to identify possible risk factors for soft tissue breakdown. Materials and Methods: An international multicenter study was conducted, and 15 men (mean age: 64.62 years; SD: ± 6.75) and 25 women (mean age: 65.24 years; SD: ± 6.77) with advanced maxillary jaw resorption (Cawood and Howell Class V or more) were included in this study. General patient data were collected, and all subjects were clinically examined. Inclusion criteria were patients who underwent bilateral AMSJI placement in the maxilla at least 1 year prior. Exclusion criteria were patients who did not have patient, surgeon, or dentist consent to participate in the study before their inclusion. Results: A total of 40 patients were enrolled, with a mean follow-up period of 917 days (SD: ± 306.89 days). Primary implant stability was achieved postoperatively in all cases, and all implants were loaded with a final prosthesis. At the time of the study, only 1 patient showed mobility (> 1 mm) of the bilateral AMSJI. Due to mucosal recession, exposure of the framework was seen in 26 patients (65%) and was mainly in the left (21.43% of 26) and right (18.57% of 26) midlateral region. A thin biotype and the presence of mucositis were found to be risk factors (P < .05). Although not significant, smokers had a risk of developing a recession that was nearly seven times (odds ratio: 6.88; P = .08) greater than that of nonsmokers. Conclusions: Twenty-six (65%) patients presented with a recession in one (or more) of the seven regions after oral rehabilitation with bilateral AMSJI placement. Several risk drivers were evaluated. The collapse of soft tissues around the AMSJI that led to caudal exposure of the arms was correlated with a thin biotype and the presence of mucositis. Palabras clave: alveolar bone loss, jawbone, gingival recession, subperiosteal AMSJI, 3D printing, risk factor, implant, tooth

Purpose: To assess whether a recently introduced implant placement micromotor that provides site-specific, operator independent cancellous bone density measurements can detect the presence of a cortical bone layer and measure its thickness and density. Materials and Methods: An in vitro experiment was performed on six double-layer polyurethane foam blocks mimicking the jawbone with different cortical thickness/cancellous density combinations. The densities were measured using the micromotor after either removing the cortical layer or leaving it intact, both with and without irrigation. Results: The results were compared by means of nonparametric statistical tests. Independent of irrigation, the micromotor detected the cortical layer when it was left intact and accurately estimated its thickness. The micromotor did not discriminate between blocks when they were considered separately, but it did when they were grouped into four or three classes. Conclusions: The present study suggests that the micromotor may represent a valid device to quantitatively assess bone quality and density. If the micromotor can quantitatively distinguish different cortical/cancellous bone combinations in humans, it may be a helpful tool for performing finely tuned, patient-tailored preparations of the implant seat, making tooth rehabilitation in challenging clinical conditions more predictable. Palabras clave: cortical bone, cancellous density, insertion torque, micromotor, primary stability, implant placement

Purpose: To evaluate the effect of continuous perioperative clopidogrel treatment on the osseointegration of titanium implants. Materials and Methods: A total of 32 New Zealand rabbits were randomly divided between two groups: a clopidogrel group (n = 16) and a control group (n = 16). For 1 week prior to the surgical placement of a titanium implant in their medial femoral condyle, rabbits in the clopidogrel group received 3 mg/kg of clopidogrel daily, and the control group received only the vehicle. This treatment was continued for another 6 weeks postoperatively. At 6 weeks, the rabbits were euthanized and postmortem histologic and histomorphometric evaluation of the implants was performed. Results: The surgical procedures and postoperative period were uneventful and well tolerated by all animals without any surgical wound dehiscence, signs of infection, or other complication. No implant failure was observed in any of the groups. Histomorphometric analysis showed that bone-to-implant contact (BIC) was 48.77% for the clopidogrel group and 34.65% for the control group, with statistically significant difference between them (P < .001). Moreover, clopidogrel group had significantly greater bone tissue density (40.52% vs 28.74%, respectively; P <.001) and mean trabecular thickness (284.7 μm vs 180.7 μm, respectively; P < .001) in proximity to the implant surface than the control group, while the mean trabecular number had no difference between groups (1.56 vs 1.60, respectively; P = .961). Conclusions: The present study showed that continuous clopidogrel treatment does not negatively affect osseointegration, but rather promotes it in terms of BIC and bone density around the titanium implants. Further studies on the effect of the P2Y12 receptor and its antagonists on peri-implant bone homeostasis may provide useful information or applications for long-term success of dental implant therapy. Palabras clave: clopidogrel, titanium implant, purinergic signaling, P2Y12 receptor, bone

Purpose: To investigate the biocompatibility of silver nanoparticle (AgNP)-doped Ti-6Al-4V surfaces by evaluating the viability and proliferation rate of human gingival fibroblasts (HGFs)—as the dominant cells of peri-implant soft tissues—seeded on the modified surfaces. Materials and Methods: AgNPs (sizes 8 nm and 30 nm) were incorporated onto Ti-6Al-4V specimen surfaces via electrochemical deposition, using colloid silver dispersions with increasing AgNP concentrations of 100 ppm, 200 ppm, and 300 ppm. One control and six experimental groups were included in the study: (1) control (Ti-6Al-4V), (2) 8 nm/100 ppm, (3) 8 nm/200 ppm, (4) 8 nm/300 ppm, (5) 30 nm/100 ppm, (6) 30 nm/200 ppm, and (7) 30 nm/300 ppm. HGF cell primary cultures were isolated from periodontally healthy donor patients and cultured in direct contact with the group specimens for 24 and 72 hours. The cytotoxicity of AgNP-doped Ti-6Al-4V specimens toward HGF was assessed by the MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide) and BrdU (5-bromo-2’-deoxyuridine) assay tests. Calcein AM and ethidium homodimer (EthD-1) fluorescent stains were used to determine the live and dead cells. The morphology and attachment properties of the HGFs were determined via scanning electron microscopy (SEM). Results: Energy dispersive x-ray (EDX) analysis confirmed the presence of AgNPs on the specimens. The MTT test revealed that AgNPs of both sizes and all concentrations presented a decreased cellular metabolic activity compared to the control discs. All concentrations of both sizes of AgNPs affected the cell proliferation rate compared to the control group, as revealed by the BrdU assay. Overall, cytotoxicity of the modified Ti-6Al-4V surfaces depended on cell exposure time. Observation via confocal microscopy confirmed the results of the MTT and BrdU assay tests. Specifically, most cells remained alive throughout the 72-hour culture period. SEM images revealed that adjacent cells form bonds with each other, creating confluent layers of conjugated cells. Conclusions: The findings of the present study indicate that Ti-6Al-4V surfaces modified with 8 nm and 30 nm AgNPs at concentrations of 100 ppm, 200 ppm, and 300 ppm do not produce any serious cytotoxicity toward HGFs. The initial arrest of the HGF proliferation rate recovered at 72 hours. These results on the antibacterial activity against common periodontal pathogens, in combination with the results found in a previous study by the same research group, suggest that AgNP-doped Ti-6Al-4V surfaces are potential candidates for use in implant abutments for preventing peri-implant diseases. Palabras clave: biocompatibility, dental implants, gingival fibroblasts, peri-implant disease, silver nanoparticles, soft tissue inflammation