DOI: 10.3290/j.jad.a12149, PubMed ID (PMID): 17489482Pages 203-208, Language: EnglishLopes, José Fernando Scarelli / Vergani, Carlos Eduardo / Giampaolo, Eunice Teresinha / Pavarina, Ana Cláudia / Machado, Ana LuciaPurpose: This study compared the shear bond strength (SBS) to enamel of rest seats made with a glass-ionomer cement (Fuji IX GP Fast), a resin-modified glass-ionomer cement (Fuji II LC), and a composite resin (Z100 MP) under monotonic and cyclic loading.
Materials and Methods: Rest seats were built up onto the lingual surfaces of 80 intact human mandibular incisors. Specimens (n=10) were stored in distilled water at 37°C for 30 days and subjected to shear forces in a universal testing machine (0.5 mm/min) until fracture. The SBS values were calculated (MPa) using the bonding area (9.62 mm2) delimited by adhesive tags. A staircase approach was used to determine the SBS fatigue limit of each material. Specimens were submitted to either 10,000 cycles (5 Hz) or until specimen fracture. A minimum of 15 specimens was tested for each material. Scanning electron microscopy was used to examine the mode of failure. Data were statistically analyzed with one-way ANOVA and Tukey HSD tests (α = 0.05).
Results: Z100 MP yielded higher (p 0.05) SBS (12.25 MPa) than Fuji IX GP Fast (7.21 MPa). No differences were found between Fuji II LC (10.29 MPa) and the other two materials (p > 0.05). Fuji II LC (6.54 MPa) and Z100 MP (6.26 MPa) had a similar SBS limit. Fuji IX GP Fast promoted the lowest (p 0.05) SBS fatigue limit (2.33 MPa). All samples showed cohesive failure patterns.
Conclusion: Fatigue testing can provide a better means of estimating the performance of rest seats made with dental restoratives.
Keywords: glass-ionomer cements, composite resins, fatigue, shear bond strength, dental bonding