DOI: 10.3290/j.jad.a38891, PubMed ID (PMID): 28849798Pages 323-329, Language: EnglishLibecki, Wojtek / Elsayed, Adham / Lehmann, Frank / Kern, MatthiasPurpose: To evaluate the efficacy of different surface treatments on the repair of veneered zirconia ceramics.
Materials and Methods: Forty-eight zirconia disks were divided into three groups according to the method of surface treatment: polished surface, air abraded, or ground using a special silicon carbide bur (SiC Grinding Bur). All specimens were primed using a primer containing MDP (Cimara Zircon, Voco) and then bonded to composite in Plexiglas tubes using dual-curing adhesive resin (Bifix QM, Voco). Each of the three groups was further divided into two subgroups (n = 8) stored either in water at 37°C for 3 days without thermocycling or stored in water at 37°C for 150 days with an additional 37,500 thermocycles between 5°C and 55°C. After storage, tensile bond strength (TBS) was measured in a universal testing machine.
Results: After 3 days of storage, silicon carbide bur and air-abraded groups showed high TBS that ranged from 32.7 to 41.0 MPa (p ≤ 0.05). After 150 days of storage with thermocycling, the air-abraded group showed the most durable TBS (34.8 MPa), while the silicon carbide bur group showed a significant reduction in TBS (21.2 MPa); in the polished control group, specimens all debonded spontaneously during storage (p ≤ 0.05).
Conclusion: Repair of zirconia ceramic after chipping of its veneers showed durable TBS when surface conditioning with air abrasion or roughening of the zirconia surface with a silicon carbide bur was provided.
Keywords: intraoral ceramic repair, zirconia repair, silicon carbide grinding bur, tensile bond strength, primer, zirconia framework, all-ceramic restorations