Pages 19-29, Language: EnglishTaché, Alex / Gan, Lu / Deporter, Douglas A. / Pilliar, Robert M.Purpose: The effect of adding a thin sol-gel-formed calcium phosphate (CaP) coating to sintered porous-surfaced titanium alloy (Ti-6Al-4V) implants on rates of initial bone ingrowth was investigated.
Materials and Methods: Control implants (as manufactured) and similar implants with sol-gel CaP coatings were randomly placed in distal femoral rabbit condyles (1 implant/leg). After healing for 6, 9, 12, and 16 days, 8 of 10 rabbits in each time group were assessed for maximum implant pullout force (N) and interface stiffness (N/mm). Selected extracted implants also were examined by secondary electron imaging to characterize affected surfaces. The implants of the remaining 2 rabbits in each group were examined by backscattered scanning electron microscopy (BSEM).
Results: Significantly greater pullout forces and interface stiffness were found for CaP-coated implants at 6 and 9 days. At 6 days, BSEM revealed bone ingrowth on CaP-coated implants but not on control implants. Secondary electron imaging and BSEM observations also suggested greater bone ingrowth with CaP-coated porous implants at 9, 12, and 16 days.
Discussion: Sol-gel-formed CaP surface films significantly enhance rates of bone ingrowth into sintered porous-surfaced implants.
Conclusion: This surface treatment may have a number of clinical benefits, including shortening the period prior to functional loading of such implants and improving treatment outcomes in situations of poor bone quality and/or quantity. (More than 50 references)
Pages 30-37, Language: EnglishKarl, Matthias / Winter, Werner / Taylor, Thomas D. / Heckmann, Siegfried M.Purpose: Fabrication and retention methods have an influence on the passivity of superstructure fit. The objective of the study was to quantify the strain development of various cemented and screwretained fixed partial dentures (FPDs).
Materials and Methods: Forty samples of 4 different types of FPDs (10 of each type) were investigated. Each sample had 3 ITI implant abutments and 2 pontics. The 3 implants were anchored in a straight-line configuration in a measurement model simulating a real-life patient situation. Strain gauges were mounted close to the implants and on the pontics. The developing strains were recorded during cement setting and screw fixation. For statistical analysis, multivariate 2-sample tests were performed, with the level of significance set at P = .1.
Results: All FPDs investigated revealed a considerable amount of strain, with no significant difference between cement and screw retention. Furthermore, no significant difference was found between the conventional fabrication modes for screw-retained FPDs. The lowest strains were found in prostheses that were intraorally bonded onto gold cylinders.
Discussion: Because bonding of the superstructure in the oral cavity may compensate for impression and laboratory variables, restorations with the best possible passive fit can result from this retention technique. Before this technique can be recommended, the long-term stability of the adhesive layer should be investigated.
Conclusions: As an absolute passive fit of superstructures is not possible using conventional clinical and laboratory procedures, and as clinical fit-evaluation methods often do not detect "hidden" inaccuracies, the more sensitive straingauge technique should be utilized for an objective accuracy test. Reference strain values from implant-supported prostheses that have served without complications could help define a "biologically acceptable fit."
Pages 38-43, Language: EnglishSantos, Maria C. L. G. / Campos, Maria I. G. / Souza, Ana P. de / Trevilatto, Paula C. / Line, Sergio R. P.Purpose: Polymorphisms, such as a guanine inserted at position -1607 in the promoter region of human matrix metalloprotenase 1 (MMP-1) or a C-1562T substitution in the MMP-9 gene, have been shown to increase the transcriptional activity of these MMPs. The objective of this study was to investigate the possible relationship between these polymorphisms and early implant failure.
Materials and Methods: Genomic DNA from oral mucosa was amplified by polymerase chain reactions (PCRs) and analyzed by restriction endonucleases. The significance of the differences in observed frequencies of polymorphisms was assessed by the chi-square and Fisher exact tests.
Results: The test group comprised patients with early failure of osseointegrated oral implants. In the MMP-1 gene, 2G allele was observed in 25% of the control group and in 50% of the test group (P = .013). The genotype 1G/1G was found in 61.5% of the control group, while all patients in the test group had the genotype 1G/2G (P .001). No differences were seen in the allele and genotype frequencies in the MMP-9 gene among the groups (P = .15 and P = .13, respectively). Discussion and
Conclusion: These results suggest that polymorphism in the promoter region of the MMP-1 gene may be associated with early implant failure, while polymorphism in the promoter region of the MMP-9 gene may not have a relationship with implant loss.
Pages 44-51, Language: EnglishWeiner, Saul / Sirois, David / Ehrenberg, David / Lehrmann, Neal / Simon, Barry / Zohn, HarryPurpose: Osseointegrated implants lack a periodontal ligament. Nevertheless, masticatory function in subjects with implant-supported restorations appears similar to function in those with natural dentition. It is not clear how the neurophysiologic mechanisms that modulate jaw movement are associated with osseointegrated implants. This study examined the output from the inferior alveolar nerve during implant loading.
Materials and Methods: In 3 dogs, 3 premolars were extracted in the mandible and 2 endosseous titanium implants were placed, allowed to osseointegrate for 3 months, and loaded with vibration force at the threshold response for tooth vibration, at 2× threshold, and at 3× threshold. Neurophysiologic recordings were made from the inferior alveolar nerve during loading of both implants and the adjacent molar and canine. The response magnitude in action potentials in the 50- ms poststimulus period and latency of inferior alveolar afferents in milliseconds were compared following implant loading.
Results: Detectable inferior alveolar nerve responses were recorded following loading from both the implants and the teeth at 2× and 3× threshold. However, the response magnitude of teeth (canine, 2.38 ± 0.18 at 2×, 2.78 ± 0.2 at 3×; molar, 2.2 ± 0.16 at 2×, 2.5 ± 0.21 at 3×) was twice that of the implants (anterior, 1.3 ± 0.12 at 2×, 1.68 ± 0.13 at 3×; posterior, 0.8 ± 0.1 at 2×, 1.53 ± 0.15 at 3×). The differences in response magnitude between the teeth and implants were significant (P × .05). The latency of response was similar.
Discussion: Management of the occlusion for implant-supported restorations has been empirically developed. An underlying assumption has been that implant-guided jaw function lacks significant proprioception to modulate mastication and related jaw movements. This animal study provides preliminary evidence that force application to implants does elicit a proprioceptive response.
Conclusion: Loading of implants does elicit a sensory response that can be observed in the inferior alveolar nerve. The implications are that during occlusal function, information from regions associated with the implant can provide knowledge that could potentially modulate jaw activity in a manner similar to natural teeth.
Pages 52-58, Language: EnglishRohner, Dennis / Tay, Andrew / Chung, Sew Meng / Hutmacher, Dietmar W.Purpose: Prefabrication of free vascularized fibular flaps is a 2-stage procedure for the reconstruction of maxillary and mandibular defects. The delay between prefabrication and flap transfer is 6 weeks and depends on biomechanical stability and osseointegration of the implants. The purpose of this animal study was to evaluate implant stability by measuring the removal torque values (RTVs) at 3, 6, and 12 weeks and to compare the results with interface strength of the bone-implant surface in the fibula, the scapula, and the iliac crest under unloaded conditions.
Materials and Methods: ITI implants (n = 108) with a sandblasted and acid-etched surface were placed in the fibula, the scapula, and the iliac crest of 6 Yorkshire pigs. Biomechanical, histologic, and histomorphometric results were collected at 3, 6, and 12 weeks, respectively.
Results: Bicortical anchored 8-mm implants in the fibula (63.7 to 101.8 Ncm) showed RTVs similar to those of monocortical anchored 12-mm implants in the scapula (62.3 to 99.7 Ncm). The RTVs of monocortical anchored 8-mm and 10-mm implants in the iliac crest (19.1 to 44.3 Ncm) and the scapula (27.2 to 55.3 Ncm) were significantly lower. The bone-to-implant contact in the fibula at 3, 6, and 12 weeks (35.2%, 44.4%, and 46.8%, respectively) was similar to that in the iliac crest (24.2%, 44.2%, and 52.5%, respectively), but significantly lower than in the scapula (63.7%, 73.8%, and 74.2%, respectively). Discussion and
Conclusion: Bicortical anchorage determined implant stability in the fibula, whereas interfacial strength seemed to define stability in the scapula. The quality and type of bone determined the bone's response in terms of biomechanical press fit or biologic interface strength.
Pages 59-65, Language: EnglishAghaloo, Tara L. / Moy, Peter K. / Freymiller, Earl G.Purpose: Platelet-rich plasma (PRP) is potentially useful as an adjunct to allograft and xenograft materials in oral and maxillofacial bone and implant reconstructive surgery. This study compares bone healing and formation in 4 cranial defects in rabbits grafted with autogenous bone, xenograft, and xenograft with PRP (with a no-graft group as a control).
Materials and Methods: Fifteen New Zealand white rabbits were included in this randomized, blind, prospective pilot study. Four identical 8-mmdiameter defects were created in each rabbit cranium and immediately grafted with the above materials. Five rabbits were evaluated at 1 month, 5 at 2 months, and 5 at 4 months. Radiographs were used to evaluate bone density.
Results: Radiographically, sites at which Bio-Oss, autogenous bone, and Bio-Oss + PRP were grafted showed a significant increase in bone density at 1 month (P = .05 for Bio-Oss, P = .02 for autogenous bone, P = .008 for Bio-Oss + PRP) and at 4 months (P = .02 for Bio-Oss, P = .04 for autogenous bone, P = .05 for Bio-Oss + PRP). Autogenous bone sites (P .001) and Bio-Oss + PRP sites (P .001) also showed significant increases at 2 months. Histomorphometrically, autogenous bone sites showed a significantly greater increase than control sites (P = .08 at 1 month, P = .03 at 2 months, P = .01 at 4 months), Bio-Oss sites (P .001 at all 3 evaluation points), or Bio-Oss + PRP sites (P = .009 at 1 month, P = .02 at 2 months, P = .01 at 4 months). Furthermore, Bio-Oss + PRP sites showed a significantly greater increase in bone area at 1, 2, and 4 months than Bio-Oss alone (P = .003 at 1 month, P = .02 at 2 months, P = .006 at 4 months).
Discussion: Radiographs showed significantly greater bone density at the Bio-Oss, autogenous bone, and Bio-Oss + PRP sites than at control sites at nearly every point in time evaluated; however, clinical significance is difficult to determine, since all materials appeared dense on the radiograph. Histomorphometry showed that the increase in bone area at autogenous sites was significantly greater than that seen with other grafting materials or at the control sites.
Conclusion: This study showed a histomorphometric increase in bone formation with the addition of PRP to Bio-Oss in non-critical-sized defects in the rabbit cranium.
Pages 66-72, Language: EnglishTakashima, Hidetoshi / Shibata, Yo / Kim, Tae-Young / Miyazaki, TakashiPurpose: The aim of this study was to evaluate the formation of a hydroxyapatite coating on titanium plate by discharging in typical and modified artificial body fluids.
Materials and Methods: Japanese Industrial Standard Grade 2 titanium plates were used as specimens. Discharging was performed on the specimens in each solution, and the surface topography of each coating was observed with a scanning electron microscope. The Ca/P atomic ratio and surface characterization of each coating were evaluated by x-ray photoelectron spectroscopy, and crystal phases of each coating were analyzed by Fourier transform infrared spectroscopy and x-ray diffraction.
Results: Tricalcium phosphate formed on the titanium surface in a 1.5 Ca/P solution with high ion concentrations of calcium (2.5 mmol/L) and phosphorous (1.67 mmol/L). Crystalline HA was formed on the titanium surface in a 1.5 Ca/P solution (Hanks' balanced salt solution without organic molecules) with low ion concentrations of calcium (1.26 mmol/L) and phosphorus (0.83 mmol/L).
Discussion: A solution containing organic pH buffer was insufficient to form stable coatings on the titanium surface. Coating properties strongly depended on the Ca/P chemical ratio of the applied solution. A Ca/P ratio of 1.5 was appropriate for preparing a calcium phosphate coating on a titanium surface, whereas a Ca/P ratio of 2.5 was excessively high.
Conclusion: These findings suggest that Hanks' balanced salt solution without organic molecules is the most suitable solution for forming crystalline hydroxyapatite coatings on titanium surfaces by the discharging method.
Pages 73-79, Language: EnglishJoannitti Cancian, Daniela Cristina / Hochuli-Vieira, Eduardo / Joannitti Marcantonio, Rosemary Adriana / Garcia jr., Idelmo RangelPurpose: The purpose of the present study was to evaluate the histologic results of bone cavities that were surgically created in the mandibles of Cebus apella monkeys and filled with autogenous bone, PerioGlas, FillerBone, or Bone Source.
Materials and Methods: Surgical cavities 5 mm in diameter were prepared through both mandibular cortices in the mandibular angle region. The cavities were randomly filled, and the animals were divided into groups according to the material employed: Group 1 cavities were filled with autogenous corticocancellous bone; group 2 cavities were filled with calcium phosphate cement (BoneSource); and group 3 and group 4 cavities were filled with bioactive glass (FillerBone and PerioGlas, respectively). After 180 days the animals were sacrificed, and specimens were prepared following routine laboratory procedures for hematoxylin/eosin staining and histologic evaluation.
Results: The histologic analysis showed that autogenous bone allowed total repair of the bone defects; bioactive glasses (FillerBone and PerioGlas) allowed total repair of the defects with intimate contact of the remaining granules and newly formed bone; and the cavities filled with calcium phosphate cement (BoneSource) were generally filled by connective fibrous tissue, and the material was almost totally resorbed.
Discussion: The autogenous bone, FillerBone, and PerioGlas provided results similar to those in the current literature, showing that autogenous bone is the best choice for filling critical-size defects. Synthetic implanted materials demonstrated biocompatibility, but the bioglasses demonstrated osteoconductive activity that did not occur with calcium phosphate (Bone- Source).
Conclusion: According to the methodology used in this study, it can be concluded that the utilization of autogenous bone and bioactive glasses permitted the repair of surgically created critical-size defects by newly formed bone; the synthetic implanted materials demonstrated biocompatibility, and the bioactive glasses demonstrated osteoconductive activity. The PerioGlas was mostly resorbed and replaced by bone and the remaining granules were in close contact with bone; the Filler- Bone showed many granules in contact with the newly formed bone; BoneSource did not permit repair of the critical-size defects, and the defects were generally filled by connective fibrous tissue.
Pages 80-86, Language: EnglishBambini, Fabrizio / Memè, Lucìa / Procaccini, Maurizio / Rossi, Brunella / Muzio, Lorenzo LoPurpose: Several recent medical reports have focused attention on the possible application of skeletal scintigraphy imaging in odontostomatology. The aim of the present report was to assess the influence of immediate prosthetic loading on peri-implant osteoblastic activity through bone scintigraphy.
Materials and Methods: Implants were placed in 2 healthy women. A nuclear medicine investigation with single-photon emission-computed tomography (SPECT) was performed for both patients at 30 and 90 days after implant placement. The study was completed with acquisitions of planar images of the skull in an anterior view and the use of regions of interest (ROIs) of the same size in the area corresponding to immediate loading and in the opposite hemimandible (at the control sites). Count density ratios (counts/pixel) obtained from each ROI were used for a quantitative/relative assessment. Tomographic images were evaluated with a qualitative method. The spatial resolution of the reconstructed tomograms and of the planar images was approximately 7 mm.
Results: Routine planar methodology provided a direct measure of cellular activity of the examined areas. The difference in count density ratio registered from the same ROI between the first and the second scintigraphy revealed the course of peri-implant osteoblastic activity, which was very high in the first month and then declined during subsequent months. Discussion and
Conclusion: In spite of the small number of involved patients, the results obtained from this pilot study suggest that nuclear medicine may hold possible advantages in implant dentistry for those who seek to clarify the still unknown aspects of osteoblastic activity.
Pages 87-91, Language: EnglishPreiskel, Harold W. / Tsolka, PepiePurpose: This retrospective study investigated treatment outcomes over 10 years of a new prosthesis design in implant prosthodontics that uses a combined cement- and screw-retained principle.
Materials and Methods: The clinical data of 78 implant-supported prostheses were examined. Each prosthesis incorporated at least 1 screw-retained element and 1 or more cement-retained telescopic units. One hundred twenty-four screw-retained and 161 cement-retained abutments were employed.
Results: Of the 286 implants placed, 5 were lost prior to prosthetic loading and 4 (1.4%) were lost approximately 14 months after loading. Eight (2.8%) abutment screws were retightened and 1 gold prosthetic screw was replaced after 1,372 days following fracture. No accidental dislodgment of any prosthesis occurred.
Discussion: The introduction of a screw retainer into a series of cement retainers permitted the use of weak cement on the telescopic abutments. This facilitated removal when required while preventing accidental dislodgment. Improved equipment and the learning curve decreased the incidence of abutment screw loosening with time.
Conclusion: The ease of retrievability, allied with the security of seating and excellent appearance, makes the combined screw- and cement-retained prosthesis valuable in implant prosthodontics.
Pages 92-99, Language: EnglishZinsli, Barbara / Sägesser, Tanja / Mericske, Ernö / Mericske-Stern, ReginaPurpose: Dental implants with a reduced diameter are designed for specific clinical situations, such as placement of implants where bone width is narrow or between adjacent teeth that have only a narrow space between them. They are particularly useful when replacing small teeth such as lateral maxillary and mandibular incisors. The aim of the present study was the clinical evaluation of 2-part ITI implants (full-body screws with a 3.3-mm diameter).
Materials and Methods: One hundred forty-nine partially or completely edentulous patients received a total of 298 2-part ITI implants over a 10-year period. After a standard healing period (3 to 6 months), the implants were restored with fixed restorations such as single crowns or fixed partial or complete prostheses or overdentures. Complete prosthesis or overdenture in the edentulous jaw was the predominant type of restoration. All patients followed a strict maintenance program, with regular recalls at least once a year. The survival rate of the implants was analyzed, and prosthetic complications were assessed.
Results: Three implants were lost during the healing phase on account of peri-implant infection. Two implant body fractures with an osseous length of 8 mm were observed (one after 2 years of observation, the other after 6 years). Four implants exhibited transient peri-implant inflammation that was treated successfully by interceptive therapy. The cumulative 5-year survival rate of the implants was 98.7% (96.6% after 6 years). Prosthetic complications were mostly limited to loose occlusal screws and sore spots caused by the denture base.
Discussion: Within the limited observation period, failures of small-diameter implants were infrequent. Prosthetic complications were not dependent on the use of small-diameter implants.
Conclusion: The use of 3.3-mm ITI implants appears to be predictable if clinical guidelines are followed and appropriate prosthetic restorations are provided. However, fatigue fracture may occur after a long period of function.
Pages 100-106, Language: EnglishCheng, Shih-Jung / Tseng, I-Yun / Lee, Jang-Jaer / Kok, Sang-HengPurpose: The aim of this prospective clinical study was to assess the risk factors associated with failure of mini-implants used for orthodontic anchorage.
Materials and Methods: A total of 140 miniimplants in 44 patients, including 48 miniplates and 92 freestanding miniscrews, were examined in the study. A variety of orthodontic loads were applied. The majority of implants were placed in the posterior maxilla (104/140), and the next most common location was the posterior mandible (34/140).
Results: A cumulative survival rate of 89% (125/140) was found by Kaplan-Meier analysis. There was no significant difference in the survival rate between miniplates and freestanding miniscrews, but miniplates were used in more hazardous situations. The Cox proportional-hazards regression model identified anatomic location and peri-implant soft tissue character as 2 independent prognostic indicators. The estimated relative risk of implant failure in the posterior mandible was 1.101 (95% confidence interval, 0.942 to 1.301; P = .046). The risk ratio of failure for implants surrounded by nonkeratinized mucosa was 1.117 (95% confidence interval, 0.899 to 1.405; P = .026).
Discussion and Conclusion: The results confirmed the effectiveness of orthodontic mini-implants, but in certain situations adjustment of the treatment plan or modifications in the technique of implant placement may lead to improved success rates.
Pages 107-115, Language: EnglishBecktor, Jonas P. / Isaksson, Sten / Sennerby, LarsPurpose: The aim of this study was to analyze and compare the survival rates of endosseous implants placed in the edentulous maxillae of patients in whom bone augmentation was undertaken prior to or in conjunction with implant placement with survival rates in patients who did not undergo bone augmentation.
Materials and Methods: This study included 2 retrospective patient groups: the graft group, which included 64 patients with 437 implants, and the nongraft group, which included 118 patients with 683 implants. The patients were treated consecutively between 1990 and 1996. In addition, the retrospective patient groups were also followed prospectively using a standardized clinical and radiographic study design.
Results: The implant survival rate was 75.1% for the graft group and 84.0% for the nongraft group after a mean follow-up of 5 to 6 years, a statistically significant difference. However, there was no difference with regard to the prosthesis survival rate, and after reoperation, more grafted patients had a fixed prosthesis at the end of the study (87.5% versus 85.3%). Implant failure appeared to be related to the original jawbone volume in the anterior regions. In the premolar region, where the inlay graft technique was used, the implant survival rate for the graft group was comparable to that of the nongraft group. The graft group had significantly more failures than the nongraft group in the incisor region, but not in the canine, premolar, or molar regions.
Discussion: The majority of implant failures occurred before loading. Occlusal overload during the healing period may have been a causative factor.
Conclusions: The overall implant survival rate was lower in grafted maxillae than in nongrafted maxillae after a mean of 5 to 6 years of follow-up. Analysis revealed that jawbone volume in the anterior regions at the start of treatment was directly related to implant survival rates in both groups: the greater the volume, the higher the survival rate. Moreover, the implant survival rate was similar in grafted posterior edentulous maxillae of classes V and VI and in nongrafted posterior edentulous maxillae of classes III and IV.
Pages 116-123, Language: EnglishNikellis, Ioannis / Levi, Anna / Nicolopoulos, CostaPurpose: The present study was undertaken to determine the feasibility of using primary stability as a predictor of implant success in patients whose implants were immediately loaded.
Materials and Methods: The study included 40 patients, in whom a total of 190 implants were placed, 102 in maxillary sites and 88 in mandibular sites. All were loaded within 72 hours of placement. Sixteen patients were completely edentulous in the mandible and/or the maxilla. The remaining 24, who were partially edentulous, received fixed partial dentures or single-implant restorations. All of the definitive implant restorations were screw retained. The criterion for loading was clinical judgment of primary stability, verified by a "screw test." Impressions were made after implant placement to facilitate the fabrication of a laboratory-made heat-processed provisional restoration from acrylic resin. Following a 4-month period for osseointegration and soft tissue healing, definitive fixed prostheses were fabricated.
Results: There were no surgical complications. After 1 to 2 years, all 190 implants had survived and were considered 100% successful, as determined by independent testing of mobility and radiographic evidence of osseointegration. In 4 patients, fracture of the provisional restoration occurred during the healing period.
Discussion: Clinical research has shown that immediate loading is a viable treatment modality. The favorable success rate reported in this study for rough-surfaced implants suggests that adherence to a protocol, an important parameter of which is primary stability above 32 Ncm, can lead to osseointegration.
Conclusion: The results of this limited investigation suggest that patients who are partially or completely edentulous may be immediately restored with implants and fixed provisional restorations, provided that the dental implants are adequately stable immediately after their surgical placement. This alternative therapeutic approach did not appear to affect the up-to-2-year survival of the implants in this patient population.
Pages 124-132, Language: EnglishCantwell, Andrew / Hobkirk, John A.Purpose: Screwed joints are widely used in implant dentistry, and their failure is a significant problem that may be related to loss of preload. Preload is the compressive force generated across a joint when a screw is tightened and is responsible for keeping a joint closed. For a given torque, preload is limited by the frictional resistance of the contacting screw threads, flange, and opposing joint surfaces. This study tested the hypothesis that following correct placement, prosthetic gold screws lose preload over time.
Materials and Methods: The study used standard Nobel Biocare components. Strain gauges mounted on a standard abutment formed a transducer to measure preload. Five sets of new prosthetic gold screws, gold cylinders, and standard abutment screws were assembled in turn on the top of an implant body, using the transducer abutment. The gold screws were tightened with a Nobel Biocare Torque Controller set to 10 Ncm, when it had an output of 12.06 ± 0.8 Ncm with 95% repeatability. Preload was monitored for 15 hours; then the screws were removed and examined under a scanning electron microscope.
Results: Preload ranged from 157.5 to 488.9 N (mean 319.6 N), with a mean reduction over 15 hours of 24.9%, with 40.2% of this occurring within 10 seconds of tightening.
Discussion: Torsional relaxation of the screw shaft, embedment relaxation, and localized plastic deformation of the gold alloy and opposing titanium threads were the most likely explanation for this phenomenon.
Conclusions: New prosthetic gold screws suffer significant loss of preload following placement.
Pages 133-144, Language: EnglishNocini, Pier Francesco / De Santis, Daniele / Ferrari, Francesca / Bertele, Gian PaoloThe purpose of this study was to develop an extraosseous, tooth-supported miniature intraoral device that could produce prosthetically driven bone distraction of small atrophic alveolar ridge segments. Extraosseous distraction requires that the distraction device be anchored to a dental implant previously placed into the ridge according to its anatomic axis. A distractor can also correct the position of implants placed in young patients before skeletal growth is completed. Similarly, it allows the alignment of ankylosed teeth not treatable by orthodontics. The device is made of (1) an engine consisting of an orthodontic micrometric screw; (2) a joint between the implant and the engine, ie, the ball attachment/o-ring system; and (3) an anchorage system to the oral cavity provided by an orthodontic appliance and a mini-implant for possible additional support. Surgery involves an osteotomy of the atrophic alveolar ridge segment, incorporating the implant, from the basal bone; afterward the device can be applied and distraction of the segment can be carried out. Distraction was successfully performed in 3 clinical cases: 2 bone-implant segments and 1 bone-ankylosed tooth segment. All cases were clinically uneventful. This mini-device for osteogenic distraction of small atrophic ridge segments can provide for accurate and precise ridge augmentation, as is required for ideal prosthetic rehabilitation.