Seiten: 508-512, Sprache: EnglischBrown / KerrHeat-curing autopolymerizing (self-cure or cold-cure), thermoplastic, and light-curing acrylic resin are the most commonly used orthodontic baseplate materials. While cured acrylic resins present few problems to the patient, in the laboratory acrylic resin has to be sprayed, mixed, or packed in a fume-extraction unit because of the harmful fumes emitted by the raw inflammable chemicals. Light-curing material, on the other hand, is virtually nonflammable and has virtually no aroma. A light-cure technique for the construction of orthodontic baseplates is described. While buildup of the baseplate is slightly slower than for self-cured material, the shorter time involved in trimming and polishing means that overall construction is faster. It is easier to obtain a uniform thickness with light-cured material, and it provides superior fit. These results, however, are subject to more extensive clinical trials. The only apparent disadvantage is the fine powder produced during trimming. Even with a bench equipped with an extraction unit, it is advisable to use a face mask to prevent the inhalation of dust.